No products
2023 There are 117 products.
-
ASME BPVC.II.B-2023
ASME BPVC.II.B-2023 2023 ASME Boiler and Pressure Vessel Code, Section II: Materials - Part B: Nonferrous Material Specifications standard by ASME International, 07/01/2023
$0.00In stock -
ASME BPVC 2023 Code Cases Boilers and...
Approval Date: December 2, 1990Code Cases will remain available for use until annulled by the applicable Standards Committee.Case 1968-1Use of Acoustic Emission Examination in Lieu ofRadiographySection VIII, Division 1Inquiry: Under what conditions and limitations may anacoustic emission AE examination conducted during thehydrostatic test be used in lieu...
$859.00In Stock -
ASME BPVC 2023 Section I
same material, outside diameter, and the maximum allowableworking pressure of the head.PG-32.1.5.3 For full-hemispherical heads, themaximum allowable opening diameter shall not exceedthat permitted in PG-32.1.4 using K = K2 for an equivalentshell constructed of the same material, outside diameter,and the maximum allowable working pressure of the...
$859.00In Stock -
ASME BPVC 2023 Section II part A-1
ASME BPVC.II.A-2023 SA-53/SA-53M141A530/A530M Specification for General Requirements forSpecialized Carbon and Alloy Steel PipeA700 Guide for Packaging, Marking, and Loading Methodsfor Steel Products for ShipmentA751 Test Methods and Practices for Chemical Analysis ofSteel ProductsA865/A865M Specification for Threaded Couplings, Steel,Black or Zinc-Coated...
$859.00In Stock -
ASME BPVC 2023 Section II part A-2
SA-748/SA-748M ASME BPVC.II.A-20231228Standard Specification forStatically Cast Chilled White Iron-Gray Iron Dual Metal Rollsfor Pressure Vessel Use1. Scope1.1 This specification covers statically cast dual metal rollswith the outer layer of the roll body being chilled white iron ofdifferent chemical composition than the core and journals ofthe roll which...
$859.00In Stock -
ASME BPVC 2023 Section II part B
ASME BPVC.II.B-2023 SB-98/SB-98M594.1.2 Copper Alloy UNS No. designation;4.1.3 Temper designation see Temper Section 7;4.1.4 Quantity; total weight or length, or number of piecesof each temper, form, or alloy;4.1.5 Dimensions; diameter or distance between parallelsurfaces;4.1.6 Type of edge; edge contours;4.1.7 How furnished; specific lengths with or...
$859.00In Stock -
ASME BPVC 2023 Section II part C
SFA-5.23/SFA-5.23M ASME BPVC.II.C-2023696Specification for Low-Alloy and High Manganese SteelElectrodes and Fluxes for Submerged Arc Welding1. Scope1.1 This specification prescribes requirements for the classification of solid and composite carbon steel, low-alloy steel,and high manganese steel electrodes and flux-electrode combinations for submerged arc...
$859.00In Stock -
ASME BPVC 2023 Section II part D (metric)
NONMANDATORY APPENDIX AISSUES ASSOCIATED WITH MATERIALS USED IN ASME CODECONSTRUCTIONA-100 GENERALThe performance over time of the various ferrous andnonferrous alloys permitted for use in Code constructionmay be influenced by many factors, ranging from the processesinvolved in their fabrication into components andtheir installation to changes in the...
$859.00In Stock -
ASME BPVC 2023 Section IV
ENDNOTES1 In order to ensure that a finished head is not less than the minimum thickness required, it is customary to use athicker plate to take care of possible thinning during the process of forming. The neck of an opening in a head with anintegrally flanged opening will thin out due to the fluing operation. This is permissible, provided the neck...
$859.00In Stock
