Innovation, Communication and EngineeringEdited By Teen-Hang Meen

Table of Contents

Advanced material science & engineering

Investigation on optical properties of titanium dioxide films from TiO2 and Ti3O5 starting materials annealed at various temperatures
S.-C. Shei

A visible-blind Mg-doped ZnO nanorods photosensor
S.J. Young, Y.H. Liu, T.H. Meen,W.Water, C.H. Hsiao & L.W. Ji

Preparation of thin Palladium composite membrane by an ultrasound-assisted electroless deposition technique
Y.-T. Chou, P.-H. Hsu, K.-S. Hsu, J.-M. Chen, M.-C.Wei, Y.-C. Yang & T.-C. Huang

High strain rate shear characteristic and fracture feature of inconel 690 alloy
T.H. Chen, T.H. Fang &T.C. Cheng

Optimization of composite laminates by a genetic algorithm
S.-F. Hwang &Y.-C. Hsu

Synthesis and characterization of CuInSe2 thin film via a low temperature solid state reaction from CuSe and InSe powders
K.-C. Hsu, J.-D. Liao, P.-Y. Lin,W.-C. Huang, I.-T. Tang & Y.-S. Fu

Effects of UV illumination on oxygen detection for ZnO film prepared by thermally oxidized Zn on sapphire substrate C.-C. Yu, Y.-T. Hsu,W.-H. Lan, M.-C. Shih, J.-H. Hong, K.-F. Huang & C.-J. Huang

Using Taguchi method for prepared gel electrolyte and applied in the dye-sensitized solar cells
W.D. Hsu, J.-K. Tsai, T.-C.Wu, J.-S. Zhou, J.-L. Li, J.-H. Liao & T.-H. Meen

Thermoelectric properties of Bi2Te3 thin films prepared by thermal evaporation method
J.-M. Lin, Y.-C. Chen, C.-P. Lin, C.-Y.Wen,W.-T. Chang, J.-S. Fan & C.-M.Wang

Self-assembly and gelation mechanism of poly(3-hexylthiophene) polymer chains in xylene solution
J.-H. Chen, Y.-H. Cheng & L.-C. Chen

Annealing effect on the optical and electrical properties of Al-doped ZnO transparent conducting films
C.Y. Kung, F.H.Wang, C.L. Huang, T.T. Lin & S.L. Young

Optimization of small molecule organic solar cells based on Boron Subphthalocyanine Chloride (SubPc) and fullerene (C60)
J.-C. Ke, Y.-H.Wang, C.-J. Huang, P.-H. Huang & C.-C. Kang

Effect of multi-trapping layers on high color stability of white organic light-emitting diode (WOLED)
K.-L. Chen, C.-J. Huang, F.-Y. Lin, D.-W. Chou, T.-H. Meen,W.-R. Chen & C.-H. Chen

A study on the influence of cooling processing on residual stress in carbon fiber reinforcement polymer during the curing process of composite laminates
C.-C. Chiang, L. Tsai &V.V. Thuyet

Using the Taguchi methodology for optimizing of porosity formation in automobile starter motor casing in pressure die casting
Q.-C. Hsu &A.T. Do

Effect of alkaline sources on the characteristics and photovoltaic performance of vertical ZnO nanorods-based dye sensitized solar cells
L.-C. Chen, G.-W.Wang, S.-W. Li & J.-H. Chen

Surface hardening of Ti-15V-3Al-3Cr-3Sn alloy after cyclic hydrogenation and subsequent solution treatment
C.-L. Huang, Y.-J. Gao, T.-L. Chuang, C.-J. Kuo & T.-I.Wu

Co-sensitization effect of orgnic/inorganic dyestuffs in dye-sensitized photovoltaic cells
C.-L. Lee,W.-H. Lee & C.-H. Yang

Fabrication of open-end TiO2 nanotubes arrays on front-illuminated dye-sensitized solar cells
S.-M. Chao, T.-H. Meen, Y.-T. Jhuo, J.-K. Tsai, T.-C.Wu, K.-C. Lee, C.-T. Ho, L.-W. Ji & C.-J. Huang

Triazoloisoquinoline based co-adsorbent in dye-sensitized photovoltaic cells
C.-L. Lee,W.-H. Lee & C.-H. Yang

Sn/3.0Ag/0.5Cu tin ball tensile creep test
C.-M. Hsu, A.-d. Lin & J.-H. Kuang

Structures of polyethylene (PE) chains in the square and triangle array SWCNT matrixes
Y.-C.Wang, S.-P. Ju, G.-J. Huang, S.-C. Huang, H.-Z. Cheng, J.-S. Lin & H.-Y. Chen

Synthesis of thick DLC film by hot filament assisted magnetron sputtering
L.-C. Lin, S.-Y.Wu, Y.-J. Gao, C.-L. Huang &V.K.S. Hsiao

Properties of as-deposited AZO films made by RF magnetron sputtering
N.F. Shih, S.L. Young, B.J. Chen, P.C. Yao, T.T. Lin & C.Y. Kung

Characteristics of UV photosensors with TiO2 nanorods
L.-W. Ji,W.-S. Shih, H.W. Shiu, C.-H. Huang, C.-H. Liu & Y.F. Chen

Analysis of transparency conducting AZO films by DC magnetron sputtering
N.F. Shih, S.L. Young, B.J. Chen, P.C. Yao, T.T. Lin & C.Y. Kung

Investigate the characteristics of Bi2O3-added 0.35 (K0.5Bi0.5TiO3)-0.65 BaTiO3 ceramics
Y.-H. Lin, P.-S. Cheng, C.-G. Kuo,W.-J. Chiang & C.-F. Yang

Mechanical properties and Cd-free buffer layer for CIGS solar cell
T.-H. Fang, Y.-J. Hsiao & C.-H. Lu

Communication science & engineering

The effect of tip-lens on coupling efficiency of plastic optical fiber coupler
J.-H. Kuang, C.-H. Yin, K.-Y. Chang & P.-C. Chen

Implement the tracking and management system applied to mobile medical monitoring instruments in ward nursing station
C.-C. Chen, P.-J. Chen, K.-H. Chuang & L.-C. Hsiao

Dual-band meandered loop antenna for WLAN Dongle application
W.-S. Chen, C.-M. Cheng, D.-H. Lee, C.-L. Ciou,W.-S. Sin & G.-Y. Cai

A printed PIFA antenna for mobile handset application
W.-S. Chen, C.-M. Cheng, D.-H. Lee, C.-K.Wang, C.-Y.Wu & J.-Y. Chang

Dual-band loop antenna on soft contact lens for wireless ocular physiological monitoring
C.H. Luo, S.H. Ting, B.M. Jeng,W.S. Chen & J.C. Chiou

A SVM and RSSI model for in-hospital LBS technology
T. Pan, C.-C. Shen, J.-C. Chang &Y.-F. Su

A fiber optic grating array sensor system for the bridge monitoring
T.-C. Liang, J.-L.Wu &Y.-L. Lin

Study on a fiber-optic sensor for debris flow monitoring system
T.-C. Liang, J.-L.Wu &Y.-L. Lin

CPW-fed monopole dual-band ceramic substrate antenna with meandered SIR loading and ellipse defected ground plane
C.F. Yang,W.S. Chen, C.K.Wang, C.M. Cheng & Z.W. Jhang

Exploring the relationship between website interactivity and user experience
Y.-H. Tu

Phase diversity method embedded with optical CDMA on radio-over-fiber transmissions
C.T. Yen & H.C. Cheng

Design of a smartphone system for calculating calorie consumption by considering altitude information
K.C. Lin, C.L. Chao, T. Erdene, M. Batzorig, Y.F. Chen, C.M. Tseng & P.J. Chen

Understanding the effectiveness of BIS parametric model for monitoring sedation and depth of anesthesia in pediatric surgery
H.-Y. Lee & C.-H. Yeng

Development of active directional antennae for use in small UAVs
Y. Guo & S.D. Prior

Computer science & information technology

Recreational devices controlled using an SSVEP-based Brain Computer Interface (BCI)
S.C. Chen, A.R. See, C.H. Yeng, Y.J. Chen & C.K. Liang

Understanding users’ intentions to continue using social media: The role of cognitive absorption, social network, social presence
M.-H. Hsu, L.-W. Chuang, S.-P. Chiu & W.-C. Chu

The implementation of contrast media injection control and monitoring systems in the department of radiology of medical center
H.-C. Yao, C.-H. Yeng,W.-S. Tzeng, G. Shu & P.-J. Chen

A study on auction strategy for keyword search
C.H. Hsu, S.C. Chen, C.H. Yeng, S.H. Chen, M.C. Hung & H.J. Ho

A feasibility study of unity3D interactive engine development
K.-S. Hsu, P.-Y. Lai, J.-F. Jiang, H.-Y.Wei, Y.-J. Chen & T.-H. Lee

An objective identification of spectral distinctiveness on acoustic cue to subjects with hearing loss
Y.J. Chen, M.D. Lee, J.L.Wu, H.M. Yang & Y.H. Lin

A novel hybrid fuzzy FDM, AHP, TOPSIS approach for successful serious game design and evaluation framework
C.-H. Su, K.T.-K. Chen & K.-K. Fan

The dynamic investigation in the subject of science and technology for elementary school students
T.-S. Lan, Y.-H. Lan, K.-L. Chen, P.-C. Chen & W.-C. Lin

Design of a fall detection system based on wireless sensor network
M.-C. Chen, Y.-W. Chiu, C.-H. Chen, Y.-H. Tang & E.-J. Chen

The research of the self cognitive body figure and the healthy concepts influencing the BMI of children
T.-S. Lan, K.-L. Chen, P.-C. Chen, C.-T. Ku, P.-H. Chiu & M.-H.Wang

New approach to cloud-based enterprise resource planning system
B.R. Chang, J.-C. Cheng, C.-M. Chen, C.-F. Huang & H.-F. Tsai

An exploration of security and privacy among cloud computing
C.-Y. Chen & J.-F. Tu

An assessment of masses regards to shape
C.Y.O. Yang, C.S. Lo, S.W. Chan, S.K. Lee & R.F. Chang

The exploratory study on students’ motivation of using human-computer interaction technology: An empirical study of second life for virtual reality
S.-H. Kuo & C.Y. Shih

Constructing an interactive multimedia lesson plan that fits in teaching scene
L.-C. Lee, C.-H.Wu & K.-M. Yang

Unity3D game-based learning system
J.-C. Chen, C.-T. Hsu, M.-H. Chiang &Y.-J. Jiang

An efficient framework for winning prediction in real-time strategy game competitions
C.-J. Hsu, S.-S. Hung, J.T. Chen, D. Tsaih & J.-J. Tsay

Electrical & electronic engineering

Improved mechanism of Ni/Au schottky contact on surface treated ZnO film
R.H. Chang, K.C. Yang, S.L. Yao, D.S. Liu, T.H. Chen, L.W. Lai & T.H. Lee

Impact of a photovoltaic system to voltage variation and power losses on distribution feeders
W.-L. Hsieh, C.-H. Lin, C.-S. Chen, C.-T. Hsu, C.-Y. Ho & H.-J. Chuang

Design of 3.1–10.6 GHz UWB CMOS LNA using RC feedback and self-body bias technology
Y.-C. Hsieh, M.-T. Hsu & W.-L. Huang

Various nanopillars on GaN-based LED to enhace light-extraction efficiency by SILAR method
S.-C. Shei

Improvement of current blocking for GaN-based LEDs by treatments of Ar plasma on p-GaN surface
X.F. Zeng, S.J. Chang, H.M. Lo & S.-C. Shei

Enhanced light-extraction efficiency in GaN-based light-emitting diodes via nanopillars on roughened surface
X.F. Zeng, S.J. Chang & S.-C. Shei

Development of a hub motor with an integrated transmission hub for electric bicycles
Y.-C.Wu & Z.-H. Sun

Design of low voltage and low power 0.32V 0.4mW based on current reuse VCO with transformer feedback and body-biasing techniques
M.-T. Hsu,W.-J. Li &Y.-R. Qiu

Determination of thrust drop for high speed maglev train driven by linear synchronous motor
W.-T. Tseng &Y.-T. Chang

The simulation of software-defined nonlinear multi-stage rectifier and power matching for wireless power transmission
W.-C. Lin, K.-Y. Lo, C.-L. Pan & C.-H. Chang

Light rail transit systems impact on the unbalance of the distribution system
C.-T. Hsu, H.-M. Huang, T.-J. Cheng & L.-J. Tsai

A wisdom LED street lamp system combining with power and solar cells
S.-F.Wang, B.-S. Huang, S.-R. Lay, Y. Chu, Y.-P. Liao, F.-H. Kao & A.-L. Liu

Investigation of modulation strategies for three-phase three-level rectifier applications
M.-T. Tsai, C.-L. Chu, C.-M. Mi, J.-Y. Jhang & B.-J. Jiang

Design and implementation of a micro-inverter for grid-connected applications
M.-T. Tsai, C.-L. Chu, C.-M. Mi, Y.-Y. Sie & J.-Y. Lin

A novel ohmic contact method for Al/n-Si by inserting ultra-thin LiF
N.-F.Wang, Y.-Z. Tsai, Y.-S. Cheng, M.-H. Chien & F.-H. Hsu

Design of photo detectors for measuring solar power
Y.-N. Chang

Design of dimmable LED lighting sets with three windings multiple transformers
H.-L. Cheng, C.-H. Chang, Y.-N. Chang, D.-C. Huang, C.-M. Kuo & S.-Y. Chan

Hybrid grey model for Taiwan electronic product forecasting
H.-L.Wong &W.-H. Tang

Realization of a three-axis motion control system based on DSP and FPGA
Y.-S. Kung, J.-M. Lin & H.-H. Chou

Motion control of meal-assistance based on a five-axis modular robot arm
Y.-S. Kung, M.-S.Wang, C.-M. Huang, B.T.H. Linh &T.-H. Jung

Application of Genetic Algorithm in optimal robotic path planning
S.S.-D. Xu, Y.-P.Wu &T.-C. Chang

Gesture motion based interactive control system for humanoid robots
M.Y. Shieh, J.S. Chiou, N.S. Pai & J.H. Li

IoT applied in data transceiver
J.-F. Tu & C.-Y. Chen

Visual control of a stair-climbing robot
M.-S.Wang, C.-M. Mi &Y.-M. Tu

Adaptive fuzzy CMAC controller design for tracking of four-wheeled omnidirectional mobile robot
T.-F.Wu, H.-C. Huang, S.S.-D. Xu & N.-T. Hu

Effects of deposition power on the properties of the heterojunction diode based on a NiO/GZO bi-layer structure
F.-H.Wang, C.-C. Huang & C.-F. Yang

A machine learning approach to dynamic programming for stochastic process of speech recognition
I.-J. Ding, C.-T. Yen & Y.-M. Hsu

Mechanical & automation engineering

Using CC-Link industrial communication on the implementation of motor HMI monitoring in lab practice
Y.-M. Lee & K.-S. Hsu

Micro-orifice structure fabricated using a one-step undercut etching technique for ultra-small water and chitosan droplets formations
C.-H. Lin, C.-H. Lan & C.-H. Yang

Optical fiber concentration sensor based on whispering gallery mode interference
C.-C. Chiang, J.-C. Chao & C.-Y. Chien

Design and fabrication of the piezoelectric actuator with double pushers
S.-J. Chang & J. Chen

Construction of the control system of cleaning robots with vision guidance
T.-S. Lan, L.-J. Yeh, M.-C. Chiu &Y.-X. Hwang

Ultrasound for optimizing dark-fermentation hydrogen production
S.-Y. Hsia, Y.-T. Chou & C.-H.Wang

Noise analysis of wagon transportation
S.-Y. Hsia, Y.-T. Chou & J.-W. Cheng

Effect of preforms on extrusion die filling of micro brass pin
S.-Y. Hsia, C.-C. Chang,W.-S. Huang & Y.-C. Kuo

Intelligent vision-based trajectory planning for spray painting using manipulator
C.C. Peng, H.Y. Lin, Y.C. Peng, K.S. Hsu & M.G. Her

Seawater desalination using electrodialysis process
C.-R. Chen, S.-W. Perng & H.-Y. Chang

The design and fabrication of a two-axis solar heat collection tracker for stirling engine applications
T.C. Cheng,W.S. Lin, T.H. Chen, T.H. Fang & W.P. Chen

Design optimization on the lower arm of motorcycle chassis using laminated structure with foam-core material
Y.-T. Chou, S.-Y. Hsia & B.-W. Lee

Delay pressure detection method to eliminate pump pressure interference on the downhole mud pressure signals
Y. Shen, L. Zhang, S. Cui, Y. Su, L. Sheng & L. Li

A novel application for enlarge focus area based on High Intensity Focused Ultrasound (HIFU) probe with a high directivity structure design
Y.L. Yu, Y.T. Chao, J.Y. Yen, C.J. Hsu, M. Kam, M.C. Ho, Y.Y. Chen & F.L. Lian

Dynamics stress analysis for a high rigidity bendable Minimal Invasive Surgical (MIS) instrument design
Y.T. Chao, Y.L. Yu, J.Y. Yen, M. Kam, C.J. Hsu, S.T. Liu, M.C. Ho, Y.Y. Chen & F.L. Lian

Effects of heat loss and friction on the performance of an air standard dual cycle
J.-C. Lin & S.-S. Hou

Performance characteristics of multi-port gas burners
S.-S. Hou & C.-H. Chou

Nonlinear vibration analysis of platform due to the base periodic excitation
S.-M. Lin,W.-R.Wang, Y.-J.Wang & T.-C. Chen

Strength analysis of blade of a vertical wind generator
S.-M. Lin,W.-R.Wang, M.-J. Teng, C.-J. Lee, S.-J. Lee & Y.-C. Kuo

A study of automatic welding system for spatial position measurement
J.-C. Lin & K. Lee

An optimization study of Coandã wall jet phenomena
V. Inthasuwan, S.D. Prior & R. Collins

Green technology & architecture engineering Effects of heat on building materials
C.-R. Chen, H.-M. Chou, T.-N.Wu & A. Sharma

Analysis of indoor sound propagation using finite element method
S.-Y. Hsia &Y.-T. Chou

Numerical simulation and design strategy for wind environments: A case study of the typical Southern Fujian village
Y. Miao & S.-C. Chiou

The establishment for home-ventilation soundproof walls by the nature-landscape basis model
L.L. Chung, Y.L. Yu, Y.T. Chao, M. Kam, S.T. Liu &Y.C. Fan

A structural design for soundproof ventilational environment with high performance and no energy consumption
Y.L. Yu, L.C. Lee, Y.T. Chao, Y.C. Fan & C.J. Hsu

Efficiency improvement of a diffusive solar cell window by optimizing the diffusion plate design with optical simulation
C.W. Lai, R.T. Chen, T.C. Lin & C.C. Kang

Research on bamboo craft development from perspective of green design
H.-C. Chen, J.-C. Tu & S.-S. Guang

Electric field analysis for a novel dual-electrode plug with low ignition voltage requirement
C.L. Shen, J.-C. Su & T.-C. Liang

Study of green building indicators in Taiwan sport stadiums
P.-I. Lin

A study of constructing the green indoors sustainable aquatic center
Y.-H. Chou, K.-Y. Liu & T.-H. Liu

High conductive and transparent poly(3,4-thylenedioxythiophene): poly(styrenesulfonate) films by adding the sulfuric acid in solar cell
T.-H. Meen, Y.-H. Chen,W.-R. Chen,W.Water, K.-L. Chen, D.-W. Chou & C.-J. Huang

Application of power electronics technology in renewable energy generation systems
Q.-P. Luan, Y. Li, S. Zhang & P.-X. Luan

Using web-based service to enhance communications in design process
K.-H.Wen & A.D.K.-T. Lam

Innovation design & creative design

A study on the evaluation of sleeping effect for the photo-induced biofeedback fabric
W.-C. Chu, H.-J. Lin & S.-P. Chiu

Usability evaluation and investigation of subjective satisfaction of the online publishing software interface
Y.-J. Lee & C.-J. Lin

A study on information visualization with smart living technology – example by an interactive product “Serenity”
P. Hsu & C.-M.Wang

A study on the integration of holograms and package display technology
Y.-L. Huang, P.-T. Ko, M.-H. Huang, P.-C. Chung & Y.-H. Chen

Construction of innovative service system dresses for wedding photography
J.-C. Tu & C.-L. Hu

Exploration on the use of recycled plastic bottles for toy development
J.-C. Tu & H.-S. Huang

Application of CAN bus monitoring system for Ford Mustang cluster
Y.-M. Lee, K.-S. Hsu & S.-B. Chang

A learning achievement prediction model for meaningful learning designs
K.-K. Fan, C.-H. Su, S.-Y. Deng &W.-J.Wang

Employing logistic service model in eco-design modular furniture system
P.C.-H. Huang, P.T.K. Hwang, G.-H. Kao &T.-J. Hsieh

Investigating Novel Applications of the Coanda Effect for Small Morphing Unmanned Aircraft
S.-T. Shen & S.D. Prior

An analysis on Kenyahara and “void” design concept of MUJI
X. Fan

Fabrication of an 3D aspherical microlens for OLED with PDMS modified using a dry etching process
Y.C. Chen, C.T. Pan, H.C.Wu, P.H. Lin, F.T. Hsu,W.C. Li & C.T. Pan

A UTV hand tool measure the BMD of Calcaneus—A simulation model
C.-H. Chang, I. Her & I.-T. Tang

A study on Julia sets to generate visual aesthetic fractal patterns
A.D.K.-T. Lam, G.-F. She, Z.-Q. Lin & Z.-W. Cai

A study on network platform of corporate strategy
Y.-L. Hsu, P.-L. Chang & D. Lin

A research of assistive devices’ design by using QFD – positioning chairs for CP children as example
I.-J. Sung &T.-L. Lin

Persuasive design aid for products leading to happy, healthy and sustainable lifestyle
L.H. Shih &W.S. He

An extensive QFD procedure for bicycle innovative design
C.T.Wu, M.H. Shao & C.S.Wu

Investigating performance and preference for novel 2D and 3D bookmark user interfaces
S.-T. Shen & S.D. Prior

Enjoy aging: Blending cultural creativity with technology
T.Y. Chang, K.L. Huang & F.W. Tung

Driving technological innovation through collaboration with design professionals
F.W. Tung, Y.P. Chou &T.Y. Chang

The appearance innovation of convenience store figurines in Taiwan
M.T.Wang & C.C. Lai

Industrial design & design theory

Apply web-based analytic tool in stapler product form design
S.-Y. Huang & C.-P. Kuo

Application of content analysis method in constructing evaluation indicators of design students’ competitive advantage
J.-C. Tu, S.-P. Chiu,W.-C. Chu & L.-W. Chuang

Head and neck support for cabin seat
G.-H. Kao, T.K.P. Hwang & P.C.-H. Huang

User autonomy: Creative experience in the process of interaction
P.-L. Chang, D. Lin & Y.-L. Hsu

A study on the consumer purchasing behavior and visual focus of DSLR digital cameras
J.-S. Lin & S.-Y. Huang

Decision-making mode of sustainable product development under EuP (Eco-Design Requirements for Energy-using Product) directive
J.-C. Tu, K.-C. Lin & Y.-C. Huang

The affective meanings influencing aesthetic preferences
S.-C. Tung, S.-M. Huang & W.-J. Li

The comparison of exploring realism between various model types on car styling design
K.-M. Chen

An interactive influential model of sustainable product development under corporate social responsibility in Taiwan
J.-C. Tu, Y.-C. Huang & C.-Y. Hsu

A novel design of lateral coachwork for noise reduction of Mass Rapid Transit (MRT)
L.C. Lee, Y.L. Yu, Y.T. Chao, C.J. Hsu, S.T. Liu & Y.C. Fan

Customer-oriented product design using an innovative integral scheme based on Kansei engineering and Kano model
K.C.Wang & F.R. Ju

Computational-fluid-dynamics simulation for charged-membrane filtration with spacer design 631
Y.-H. Cheng, W.-C. Tsai & S.-H. Cheng

An initial study on the attitudes of NewYoung-Olds in Taiwan towards electronic pets
K.C.K. Lee & W.L. Tang

Pattern search and style analysis for the design of comic figures
B.-S. Lin & S.-T. Tsai

Study on development strategy of sustainable product design in product service system: Using ASUS technology products as an example
H.-Y. Chen & J.-C. Tu

Exploring emotional design of user’s needs – green products as example
T.-L. Lin &W.-Y. Tai

Design management for positive creativity
D.-B. Luh

Cultural & creative research

On the relations between the colour of museum collection derivation commodity and its cultural connotation: A case study of theWooden Deity of the Lord Tiger
M.-Y. Hsu & S.-S. Guan

The development and creating methods in digital ink painting
D. Lin, P.L. Chang & Y.L. Hsu

A study of the experimental teaching on sense of space and stereo visual illusion
Y.-L. Huang

A study of cultural and creative commodity innovation in the design business of the indicator
P.-H. Yang & M.-C. Ho

On the graphic ornamental pattern of the Kinmen traditional architecture
C.-S. Tseng & Y.-F. Chen

On the geometric arrangement ofWufeng and Banqiao Lin family Mansion and Garden in Taiwan
C.-S. Tseng & Y.-Y.Wang

Discussion on the research model of traditional settlement from the perspective of cultural routes—Take Tai-MIN area for instance
Y. Miao & Y.-H.Weng

Development of medical care in southern Taiwan – Medical College and Hospital National Cheng Kung University in case
W.-H. Ting

Kunishima Suiba’s comic illustrations of Taiwan: The presentations of colonized culture under Japanese colonial rule
H.-Y. Lin & Ph.D.L. Peng

The development of Taiwan’s Siraya local industries – learning fromYomitan village, Okinawa
L.-H. Peng, C.-Y. Pan & T.-H.Wei

Establishing principles and model of sustainable product development for enterprises under rental consumption of the product service system in Taiwan
J.-C. Tu & Y.-C. Huang

The classics-reading education modeling exploration for elementary schools in Taiwan through an application of CORPS framework
C.-A. Tang, D.-S. Lin, L.-C. Chang & K.-M. Chen

A study on design of manipulation of Shadow Puppet Game-based learning with Kinect Technique
K.-K. Fan & P.-W. Hsiao

Research on the methods of building brand image from the multimedia perspective
Q. Li & H. Zhang

A study on digital value-added applications of Chinese calligraphic fonts
A.D.K.-T. Lam, K.-H.Wen & Y.-Y. Lee

Examining artistic commodity design through the shift between art and design
M.-H. Hsieh & S.-S. Guan

The research of interactive performance with puppet in digital technology environment
S.-M. Tseng & C.-M.Wang

Interaction of space-time effect between De Qi of acupuncture and cerebral cortex–the clinical application in combined treatment of acupuncture, steroid and hyperbaric oxygen therapy in sudden deafness
J.-J.Wen, H.-M. Chou, C.-K. Lee & H.-C. Lee

A discussion on trademark designs of Taiwan’s popular designer fashion labels
T.-C. Kuo, H.-C. Chang &Y.-L. Huang

Tackling the myth about the Chinese translation of the word “religion” by means of etymological analysis
J.-W. Yu & H.-M. Chou

Preliminary investigation into the roadside banquet culture in Taiwan
C.-Y. Lin, H.-M. Chou & H.-Y. Chen

Symbolic analysis and metaphorical character of ancient Chinese lighting fixtures
Y.-R. Chiu, H.-M. Chou & H.-Y. Chen

Lotus born from silt: Drawing from TangYa Lay’s works to explore the use of reservoir silt in ceramics
C.-W. Pai & L.-C. Tsai

Creative sales for fruit vinegar – A market example based on Tang Po Vinegar
H.-L. Kao, L.-C. Tsai & H.-C. Chang

The creatively innovation of Shanghai-style Cheongsam in Taiwan – citing Londee and Shiatzy as examples
H.-H. Lo, H.-M. Chou & M.-T. Tsai

A study on development of industries related to Agarwood – taking Pingtung region in Taiwan as an example
L.-C. Chin, H.-M. Chou & Y.-L. Huang

Applied mathematics

Stabilization of a class of singularly perturbed bilinear systems: Composite state-feedback control
C.-J.Wang & J.-S. Chiou

On iterative method for hierarchical fixed points problems and variational inequality problems
Y.-C. Liou

Management science

System’s marginal benefit from recycling and integration
P.C. Yang & X.C. Lai

Innovation management for precision machinery industry courses
C.Y. Shih

Independent directors and earnings management
C.-Y. Hsu &Y.-C. Yang

Development of sports center construction indicators
P.-I. Lin

A study of Grey Markov forecasting model – forecasting the trend of financial turmoil – the research analysis of Taiwan IC assembly industry
L.-C. Lin & S.-Y.Wu

Others

Study of magnetic properties on magnetic nanostructures array with different pore distances
C.-C. Hou,W.-A. Chen, C.-H. Huang, T.-H. Meen, J.-K. Tsai & T.-C.Wu

Phase Change Material (PCMs) apply for high load gearbox improving peak heat load capacity
C.-R. Chen & T.-N.Wu

Simulation of drying chamber using different heat transfer/storage materials
H.-M. Chou, C.-R. Chen, T.-N.Wu & A. Sharma

The detection of biomolecules using self-assembled microspheres in an immunoassay
C.-H. Chen, H.-S. Lin & J.R. Carey

Application of information graphics in children’s perceptions of unsafe act causing fires
F.-S. Lin & C.-P. Hsieh

The standardization of artificial emotion based on ontology
K.-K. Fan, S.-Y. Deng, C.-H. Su & F.-Y. Chang

Use a simple ultrasound tool to measure jaw bone – a porcine model
C.-H. Chang, I. Her & I.-T. Tang

Investigation of the sensing characteristics of TFBAR in liquid media
Y.-C. Chen,W.-T. Chang, J.-M. Lin, J.-M. Jiang, C.-C. Cheng & K.-S. Kao

An experimental study on thermal contact resistance between the AlN film and the copper specimen
H.-M. Chou, J.-C.Wang & Y.-P. Chang

Effects of nitride on friction and wear of low carbon alloy steel – SCM415
Y.-P. Chang, G.Wang, L.-M. Chu & Y.-C. Hwang

A study on wear and thermal expansion for the materials of drive elements after the heat treatments with deep cryogenic treatment
Y.-P. Chang, J.-H. Horng, L.-M. Chu & Y.-C. Hwang

Self-oscillating push-pull high-voltage generator for a vehicle shock-absorber with electro-rheological fluid in a suspension system
C.-L. Shen, T.-C. Liang & C.-C.Wang

EEG coherence analysis to discriminate normal aging and MCI
M.-C. Ho, T.-C. Chen, C.-F. Huang, C.-H. Yu, J.-M. Chen, R.-Y. Huang, H.-C. Ho & C.-J. Liu

Study on a widespread diffuse cross-frequency interactive effects on compensation and connectivity by the bispectral analysis
C.-J. Liu, C.-H. Yu, C.-F. Huang, R.-Y. Huang, C.-J.Wang, Y.-S. Liu, T.-C. Chen & M.-C. Ho

The preliminary study of early church architecture development of the Presbyterian Church in Taiwan
Y.-F. Chen & C.-K. Nieh

Applying and developing E-learning to talents management
S.-Y. Ho, H.-J. Fu & Y.-Y. Lin

Personality traits influences on the knowledge sharing of faculty in the universities
K.-S. Chang & S.-L. Lin

The study of digital camera consumer’s purchasing behavior
F.-K. Hung, Y.-C. Lu & C.-L. Yang

To escape singular positions on parallel milling machine by ACO method
J.-C. Lin, Y.-M. Chang, Y.-S. Chen & C.-C. Chang

Exploring the relationship within personal characteristics, aims and reasons of learning in further education by associating rule mining
W.-C. Tsai

A creative teaching strategies of consulting team teachers
P.-Y. Chuang, S.-L. Ching & F.-M. Liu

Competition and cooperation on freight between Hong Kong and Inland
C.-M. Chang

Author index