Functional Pavement DesignProceedings of the 4th Chinese-European Workshop on Functional Pavement Design (4th CEW 2016, Delft, T

Table of Contents

Flexible Pavements

A multi-scale diagnosis model for asphalt pavement cracking in China
D. Wang, A. Cannone Falchetto, M. Goeke, M.P. Wistuba & Y. Tsai

A new look at the UK flexible pavement design method
I. Artamendi, B. Allen & P. Phillips

A numerical definition of functional pavement
R. Guo, Y. Zhou, S. Chen & Y. Zhao

Adhesion properties of warm recycled mixtures produced with different WMA additives
F. Frigio, A. Stimilli, M. Bocci & F. Canestrari

Applications of FEMOL and EEP self-adaptive method in static analysis of asphalt pavement structures
Y. Dong, Q. Xing, N. Fang & S. Yuan

Comparative study on dynamic modulus of asphalt mix with two-point bend and uniaxial compression
Y. Huang, Z. Liu, X. Wang & S. Li

Compressible behaviour of bituminous mixtures in creep recovery test in confinement
A. Mathruswamy, P.K. Athira & S.P. Atul Narayan

Economically optimal structural design methodology for flexible pavements
A. Tsiknas & A. Athanasopoulou

Effect of different variables on asphalt mechanical properties
H.M. Al-Mosawe, N.H. Thom, G.D. Airey & A.H. Al-Bayati

Evaluating the feasibility of Freeze-Thaw cycling test on durability of asphalt mixtures: A pilot study
C.-H. Ho, J.Y. Shan, F.Y. Wang & Y.Y. Chen

Evaluation of asphalt pavement bearing capacity using SAFEM
P. Liu, D. Wang, F. Otto, J. Hu & M. Oeser

Formulation and application of Burger Model Based Representation function in characterization of asphalt mixtures
C.-H. Ho

Issues related to measurement of dynamic modulus of bituminous mixtures
S. Deepa, U. Saravanan & J. Murali Krishnan

Low-temperature properties evaluation index of Rubber Asphalt
Y.K. Fu, L. Zhang, Y.Q. Tan & D.Y. Meng

Mechanical performance of pavement using porous asphalt as overlay in maintenance
M. Li, B. Xu, D. Cao, S. Ping, Y. Fan & J. Li

Multiscale modeling to predict Hot Mix Asphalt stiffness behavior
L. Eberhardsteiner, B. Hofko & R. Blab

Prediction of dynamic tensile strain at the bottom of asphalt concrete layer under FWD load
C. Ai, C. Xiao, D. Ren & Y. Qiu

Regularities of creep and long-term strength of hot asphalt concrete under tensile
B.B. Teltayev, A. Iskakbayev & C. Oliviero Rossi

Research on nonlinear fatigue damage properties of asphalt mixture based on the decay of strength
H. Liu, Z. Ouyang, C. Liu & G. Qian

Review of Mechanistic-Empirical design approach for asphalt pavements
A. Gupta & S. Adhikari

Simulation of three point bending test of asphalt mixture based on Cohesive Zone Model
T.H. Yan, X.M. Huang & T. Ma

The effect of mixing sequence on the workability and indirect tensile strength of asphalt concrete
J. Voskuilen, B. Gaarkeuken, D. van Vliet & M. Poot

The impact of dynamic modulus of various HMA mixes on fatigue cracking prediction
K. Georgouli, C. Plati & A. Loizos

The use of steel mesh reinforcement for the cracking control in flexible pavements: FE analysis in static and dynamic conditions
M. Agostinacchio, D. Ciampa, S. Olita & M. Simonetti

Use of dissipated energy to quantify fatigue life of Warm Mix Asphalt
K. Lakshmi Roja & J. Murali Krishnan

Use of Mechanistic-Empirical Pavement Design Guide for bituminous pavements in India
B. Dokku & J. Murali Krishnan

Pavement & Bitumen

Application of high percentage of RAP in asphalt mixture: Blending process and performance investigation
B. Yu, Q. Liu, F. Ni & M. Wu

Behavior characteristic of Rubber Powder Modifier (RPM) during ageing process of Rubber Modified Asphalt (RMA)
P. Xiao, Y. Wang, A. Kang & J. Zheng

Characterization of stable crumb rubber asphalt and mixture
T. Ma, Q. Ye, C.Y. Wu & X.M. Huang

Density calculations of the asphalt model using Molecular Dynamics (MD) method with different force fields
H. Yao, Q. Dai & Z. You

Effect of spindle diameter and plate gap on the rheological properties of asphalt binders
B. Singh, N. Saboo & P. Kumar

Effect of the Xanthan gum biopolymer on rheological and aging properties of bitumens
L.-l. Tu, S.-p. Wu, G. Liu & Q. Liu

Effects of the warm-mix surfactant content on the rheological properties of asphalt
Y. Yang, H. Liu, E. Li, Y. Dong & L. Yang

Estimation of viscous and fatigue dissipation of bituminous concrete in repeated loading tests
R. Gupta & S.P. Atul Narayan

Evaluation of intermolecular interaction between virgin and aged asphalt binders using GPC
Y. Ding, B. Huang & X. Shu

Evaluation of oxidation products generated in long term field-aged bitumen
K. Zhao, Y. Wang, Y. Wen & D. Chong

Experimental study on warm mix technology of rubber modified asphalt mixture
A.H. Kang, M.B. Yao, X.Y. Jiu & P. Xiao

How to characterize the mechanical response of Bitumen Stabilized Material?
M.K. Nivedya, A. Veeraragavan & J. Murali Krishnan

Investigation on asphalt’s wax-induced phase separation behavior and its impact on rheological properties
M. Gong, H. Yao, T. Pauli, Z. Yao & J. Yang

Investigation on fatigue properties of basalt fiber asphalt mixture
P. Xiao, Y. Lv, J. Jiang & Z.G. Wu

Laboratory evaluation of rejuvenated asphalt binders
F. Giustozzi, E. Toraldo & M. Crispino

Laboratory investigations of DBM (Grade 1) mix using different types of additives
K. Gupta, T. Chopra & M. Kumar

Low temperature cracking of modified asphalt mixtures as related to binder characteristics
W. Huang, B. Li & P. Wang

Material optimal design of binder course between new and existing pavement in Alpine regions
W. Wei, N. Li & C. Han

Microscopic evaluation method of Polymer Modified Bitumen performance
C. Kou, A. Kang, P. Xiao & Z. Wu

Performance of asphalt binders modified with Re-refined Engine Oil Bottoms (REOB)
T. Bennert, C. Ericson, R. Corun & F. Fee

Physical and rheological characteristics of unaged and aged binders
B.A. Feyissa

Research on the adhesive properties between asphalt and aggregates in high temperatures based on the theory of surface free energy
Y.Z. Wang, X.D. Wang, Y. Zhang & Y.Z. Zhang

Study on the permanent deformation of HR rubber powder composite modified asphalt mixture based on dynamic creep test
Z. Wu, R. Lu, D. Cai & P. Xiao

The "false positive" on the antiaging properties of asphalt fines investigated by RTFO laboratory aging of mastics
M. Makowska & T.K. Pellinen

The application of Polyphosphoric Acid for preparation of polymer-modified bituminous blends
O. Shulga, R. Maldonado, L. Degao & Z. Yan

The high temperature performance and microstructure of TLA modified asphalt
F.Q. Dong, X. Yu, S.J. Liu, B. Xu & J. Chen

The importance of wetting in healing of bitumen
G.A. Leegwater, A. Scarpas & S.M.J.G. Erkens

The rheological properties and microstructure of Crumb Rubber Modified Asphalt
G.Y. Ding, X. Yu, F.Q. Dong & F. Gu

Thermal behaviour of extracted rubber from hot and warm rubberized asphalt binders
H.Y. Yu, Z. Leng & Z.M. Gao

Using molecular dynamics to investigate interfacial adhesion between asphalt binder and mineral aggregate
M. Guo, Y. Tan, A. Bhasin, J. Wei, X. Yang & Y. Hou

Viscoelastic solid-fluid transition in bitumen using rheology and FTIR spectroscopy
M.R. Nivitha & J. Murali Krishnan

Pavement Performance & LCCA

A finite element model to evaluate the effect of vegetation on temperature variations of pavements
C.-H. Ho, H. Dai & A.-M. Davidescu

A modelling and optimizing approach on the pavement maintenance management
Z. Cheng & Y. Qiao

Aggregating network-level pavement performance data based on Gaussian Mixture Models
Y. Yu, L. Sun & H. Zhu

Analysis and modeling of rutting for long life asphalt concrete pavement
B.A. Feyissa

Analysis of effects of high temperature and heavy traffic loads on anti-rutting performance of Gravel Asphalt Concrete mixtures
S.Z. Zhu, S.Q. Wang & X.M. Huang

Calibration of rutting prediction model for semi-rigid pavement and sensitivity analysis
Y. Zhu, F. Ni & H. Li

Energy-consumption model for Chinese highway maintenance based on Life Cycle Assessment
H. Tang, H.D. Kuai & X.M. Huang

Measuring the sustainability of roads: Will a rating tool do? A developing country perspective
C. Rudman & K. Jenkins

Multi-index design method of asphalt overlay based on pavement performance
X.C. Hou, Y.Y. Ren, L.P. Cao & S. Yang

On the use of Normalised Modulus for estimation of fatigue life of asphalt mixtures
K. Remya Varma, J. Murali Krishnan & H.U. Bahia

Pavement performance depends on integration of design and management
W. Visser & W.R. Hudson

Pavement performance evaluation and creep properties study on asphalt mixture modified by anti-rutting agent PCF
P. Zhang, H. Li, N.Y. Yin & D.H. Ma

Performance evaluation of Preventive Maintenance Treatments for asphalt pavements in Beijing
C. Wang, S. Zhao, H. Zhang & J. Zhang

Preliminary assessment of functional life of anti-icing asphalt mixture
L. Hao, D. Yuming & L. Gen

Study on fatigue properties of recycled asphalt
Y. Tan, Y. Fu & Y. Li

Study on preventive maintenance technology for porous asphalt in China
B. Xu, M. Li, D. Cao, C. Lu, J. Chen & W. Wang

Sustainable and long life flexible pavements
A.F. Nikolaides

Towards sustainable horizontal asphalt recycling
J. Qiu, M. Huurman, M. Jacobs, M. Woldekidan & M. Frunt

Pavement Structures

Adaptability of pavement structures on expansive soil embankment with differential deformations
Y. Cheng, X. Huang & C. Li

Analytical solution and distribution characteristics of mechanical response for elastic half-space body under hyperbolic paraboloid vertical load
S. Chen, D. Wang, J. Yi & D. Feng

Design inputs variabilities influence on pavement performance reliability
Y.H. Dinegdae & B. Birgisson

Evaluation of permanent deformation of mixtures under intersection vehicle loading
X. Wang, X. Gu, M. Yang, H. Ma & H. Shen

Experimental and numerically supported determination of the interlayer bond shear stiffness
B. Hristov, F. Wellner & G. Canon Falla

Experimental research on service performance of fiber-reinforced stress absorption interlayer
H. Liu, Z. Li & L. Yang

Field investigations of the crack pattern in porous asphalt—Continuously Reinforced Concrete Pavements in The Netherlands
D. Ren, L.J.M. Houben, W. Nijssen, R. van der Aa & B. Sluer

Filler bitumen ratio measurement of asphalt mixture based on histogram matching
C.F. Wang, A.M. Sha & Z.Y. Sun

Frost heave of saturated silty clay under thermal-hydro-mechanical loading
H. Ma, F. Zhang, R. Jing & D. Feng

Impact of dual gauge railway tracks on traffic load induced Permanent Deformation of low embankments
A.D. Mwanza, P. Hao, M. Muya & H. Zhang

Influence of principal stresses distribution on damage of asphalt pavement on semi rigid bases—case study on Ji-Qing highway
G. Yuan & X. Li

Influencing factors on bonding layer performance effect between the ultra-thin surface
N. Zhang, N.-X. Zheng & Z.-H. Cong

Investigation on base course of cement stabilizing Phosphorous Slag and gravel
G. Qian, Q. Xiang & J. Bo

Investigation on fatigue properties of asphalt mixtures with different compaction levels using microstructural analysis
J. Hu, P. Liu, D. Wang & M. Oeser

Mechanical deformation behaviour of road base Unbound Granular Materials considering the effect of temperature
J. Patzak & F. Wellner

Mechanical properties and durability of Composite Soil Stabilizer Stabilized Gravel Soil compared with Cement Stabilized Macadam
Y. Zhao, Y. Gao & Y. Zhang

Numerical analysis of factors affecting the fatigue life of asphalt pavement with semi-rigid base
T.Y. Zhu, S.Q. Wang & X.M. Huang

Pull-out tests on bituminous specimens with steel wire mesh reinforcements
F. Mazzotta, A. Simone, V. Vignali, C. Lantieri, C. Sangiorgi & G. Dondi

Research on the influence of light truck on pavement Permanent Deformation
X. Dai, Y. Gao & X. Hu

Review and study of mechanical vibrations for pavement condition assessment
C.-H. Ho & A.-M. Davidescu

Road pavement density evaluation—a case study
A. Hartikainen, T.K. Pellinen, J. Eskelinen, E. Huuskonen-Snicker & P. Eskelinen

Statistical analysis of axle load data and pavement damage for a few National Highways in India
D. Savio, P. Paul & J. Murali Krishnan

The mechanistic-empirical pavement design: An Egyptian perspective
A.A. Aguib & S. Khedr

Thermal effect analysis of steel bridge during Guss Asphalt pavement paving
Y. Liu, Z.D. Qian, J. Hu & L. Jin

Thermal regime analysis and protective measure evaluation for wide embankment in permafrost regions of Qinghai-Tibet plateau
T. Ma, T. Tang, H. Wang, X.M. Huang & S.Q. Wang

Use of repeated load CBR test to characterize pavement granular materials
N. Sparsha, R.G. Robinson & J. Murali Krishnan

Pavements & Environment

Air temperature based climate zones for flexible pavement designs
X. Yang, Z. You, J. Hiller & D. Watkins

Application of TiO₂ mixed epoxy resin technology for exhaust gas degradation
D. Li, Y. Pan & Y. Zhu

Comparative analysis of force amplified piezoelectric transducer used for asphalt pavement energy harvesting
H. Zhao, Z. Lin & L. Qin

Comparing in-lab and on-site measurement of pavement acoustic absorption
F.G. Praticò & D. Vizzari

Components changes of bitumen aging and recycling with waste vegetable oils
Z. Suo, L. Chai, J. Ji, F. Guo & L. Sun

Effects of sodium acetate on asphalt mixture comparing to chloride-based deicers
S. Liu, N.X. Zheng & J. Yang

Evaluation of emulsifier optimization based on early performances of a mixture for cold recycling
H. Liu, Z. Wang & L.Y. Yang

Examining the effects of contributory factors on curing of Cold Bitumen Emulsion Mixtures
A.I. Nassar, N.H. Thom & T. Parry

Intelligent pavement materials with ecological active dust control technology
Z. Suo, F. Guo, J. Ji, S.S. Jin & A. Zhang

Low noise gradation design for micro-surfacing mix based on indoor noise test method
L.P. Cao, S.Q. Liu, X.S. Hou & R. Zhang

Phase change heat storage properties of PEG/SiO₂ Shape-Stabilized Phase Change Materials in asphalt
L.H. He, B.M. Tang, H.Z. Zhu & X. Cao

Preparation of nano TiO₂ dispersed in silica sol and study on NO degradation rate used in cement-based specimens
X.J. Cao, C. Chen, X.Y. Yang & B.M. Tang

Quantification and modelling of tyre-pavement interaction noise: Effect of vehicular, pavement, and environmental characteristics
A. Kamineni & V. Chowdary

Stiffness and fatigue performance of recycled mixtures with 50% RAP and different types of virgin bitumen
E. Manthos & A.F. Nikolaides

Study on the effect of warm mix asphalt mixture performance caused by the dosage of recycled asphalt pavement
P. Guo, W. Wei, B. Tang & C. Shi

The materials selection and treatment effect of the filtration layer in porous pavement
D. Feng, X. Xie, H. Wang, R. Jing & J. Liu

The preparation, characterization and application of modified nano-TiO₂ in automobile exhaust purification
R. Li, J. Cui, B. Xue, D. Kuang & J. Pei

Tire-pavement contact modeling and noise prediction with different tire configurations and surface characteristics
Y.M. Ding & H. Wang

Treatment effect test on road runoff by different combinations of gravel and activated carbon
G. Qian, J. Zhu & J. He

Warm Mix Asphalt (WMA) technologies: Benefits and drawbacks—a literature review
A. Diab, C. Sangiorgi, R. Ghabchi, M. Zaman & A.M. Wahaballa

Pavements & Innovation

Analysis and application research on volume parameters of porous asphalt mixture
Z. Chen, D. Zhang, P. Hao & J. Liang

Characterization of polymer capsules used for self-healing asphalt pavements
T. Al-Mansoori, R. Micaelo & A. Garcia

Comparative study of two different polymer systems for the application in flexible pavements
M. Jasso, D. Bakos, J. Stastna & L. Zanzotto

Comparison of fatigue test methods on asphalt mastic
C. Riccardi, A. Cannone Falchetto & M.P. Wistuba

Design and challenges of an innovative load-bearing permeable concrete pavement
Y.-H. Lee, N.N.S. Chou & J.-W. Chen

Design and performance investigation on dense graded anti-sliding ultra-thin wearing course material
Y.S. Guan, L. Geng, S.L. Zhang, W. Zhou & G.L. Jin

Evaluation of chloride induced damage in stone mastic asphalt mixes suitable for induction heating
P. Apostolidis, X. Liu, A. Scarpas, M.F.C. van de Ven & G. van Bochove

Evaluation of laboratory performance on half-warm asphalt mixture
H. Liu, Y. Tong & Y. Dong

Evaluation of low temperature performance of warm mix asphalt by glass transition temperature
X. Yu, F. Gu, F.Q. Dong, G.Y. Ding & T.Y. Wang

Experimental study on damage evolution of asphalt mixture using Digital Image Correlation
C. Xing, T. Tan, L. Zhang & Y. Tan

Framework for in situ soil stabilization based on electrokinetic principles
N.G. Pavlatos & A. Scarpas

Innovative pavement structures for urban express corridors
C. Yin, Y. Pan & Z. Zhang

Mitigation of asphalt pavement temperatures by means of natural air convection
A. Chiarelli, A. Dawson & A. García

Mixing and compaction properties of asphalt mixture modified with silane
S. Büchler, A. Cannone Falchetto & M.P. Wistuba

Numerical simulation of dynamic responses of basalt fiber reinforced asphalt pavement under moving loads
P.Q. Wang, F.J. Wang, M.Q. Ke, Z.G. Lu, H.Q. Zhang & Z.Y. Zeng

On the use of low-cost PVA fiber to develop ECC material for pavement use
Z.G. Zhang, Q. Zhang, S.Z. Qian & V.C. Li

Research into the material properties of prefabricated rollable asphalt pavement
Y.-s. Dong, Y. Hou, D.-w. Cao & Y.-j. Zhang

Research on application of semi-flexible pavement base on trunk highway
B.F. Zheng & W. Liu

Research on ice-melting technology of high elasticity pavement surface
L. Wang, M. Li, X. Wang & X. Sun

Research on material and method of microwave ice-melting technology
M. Li, X. Wang & L. Yuan

Research on the coarse aggregate configuration of asphalt mixture with skeleton dense structure based on center of mass synthesis
H. Guo & Y.L. Zhao

Rutting prediction of nanomaterial modified asphalt concrete using FEM simulation
L. Gu & L. Sun

Self-powered sensors for road pavements
F.G. Praticò, F.G. Della Corte & M. Merenda

Strain sensing capacity of multifunctional cementitious material
Z. Ge, W. Hao, X.S. Wu & R. Sun

The influence of road condition on the shelf-life of tomatoes
C.J. Pretorius & W.J.vdM. Steyn

Rigid Pavements

A fast and durable concrete repair material: High-Early-Strength Engineered Cementitious Composites
H. Deng & S. Qian

Analysis of surface texture character of Exposed-Aggregate Concrete Pavement using digital image technology
X. Cheng, S. Han & X. Wang

Characteristics of water-cement ratio for grouting cement asphalt emulsion paste with different asphalt-cement ratios based on viscosity study
J. Ouyang & Y. Tan

Comparative analysis of short paneled pavement using 3-D Finite Element analysis
A. Gupta & T. Gandhi

Expansive reactions in cement concrete pavement structure and the way how to analyse the risk of their occurrence
J. Stryk, Z. Nevosad, M. Gregerova, A. Frybort & V. Chupik

Optimum design for sustainable, ‘green’ concrete overlays. Part I: (a) mix-design, (b) controlling flexural failure
Y. Lin, J.N. Karadelis, A.O. Olubanwo, Y. Xu & P. Phillips

Optimum design for sustainable, ‘green’ concrete overlays. Part II: Shear failure at cracks and inadequate resistance to reflection cracking
Y. Xu, J.N. Karadelis, Y. Lin, A.O. Olubanwo & P. Phillips

Optimum design for sustainable, ‘green’ concrete overlays. Part III: Failure due to interfacial delamination
A.O. Olubanwo, J.N. Karadelis, Y. Xu, Y. Lin & P. Phillips

Recommendation on noise control standard for concrete pavements in China
L. Li, B. Li, Z.W. Zhang & X.L. Yang

Research of cement concrete pavement using thermal imaging method
I. Gameliak, V. Vyrozhemskyi, I. Voloshyna & M. Dmitriev

Static and dynamic response of rigid concrete pavements: Parametric study
J. Ramaekers, L. Vandewalle & H. Degée

Safety

Effect of compaction on skid resistance of asphalt pavements
E. Kassem, A. Awed & E. Masad

Evaluating wet-weather driving safety risks of pavement ruts
L. Chu & T.F. Fwa

Optimisation of photoluminescent painting treatments on different surface layers
F.G. Praticò, S. Noto & A. Moro

Preparation and evaluation of haze-eliminating coating materials for asphalt pavement
B. Xue, Y. Wang, L. He, J. Zhang & J. Pei

Road safety research about influence of crosswind on highway parallel twin-deck bridges using numerical simulation
Z.W. Yu, M. Xu, F. Chen, X.D. Pan & W.J. Zhu

Rockfall protection of road infrastructures: Design approach and numerical simulations
M. Agostinacchio, D. Ciampa & S. Olita

Study on the decay law of skid resistance of High Friction Surfaces
Z. Li, L. Dong & P. Hao

Study on the influence of heavy load on pavement structure and load control
X. Ma & X. Wang

Study on working conditions of expressway asphalt pavement by monitoring test road
Z.J. Xi, J. Chao, H.D. Ding & W. Chao

Traffic Engineering

A review of pedestrian safety models for urban areas in Low and Middle Income Countries
R.A. Kraidi & H. Evdorides

An investigation for an all-encompassing iRAP road Star Rating index
A.K. Jameel & H. Evdorides

Analyzing and modeling of the lane-crossing behavior and traffic conflicts when riders of non-motorized vehicles drive on curb-parking sections
Y. Ci, Z. Liu, S. Zheng, L. Wu, Z. Bian & X. Li

Perceived differences in travel speeds and traffic states
H. Li, H. Tu, H. Liu & H. Shi

Real-time freeway crash prediction model by using single ultrasonic detector lane-level data
J.M. You, J.H. Wang & S.E. Fang

Real-time monitoring of the extended road network by utilising telematics technology
I. Wessels & W.J.vdM. Steyn

Recognising risk factors associated with crash frequency on rural four lane highways
C. Naveen Kumar, M. Parida & S.S. Jain

Rural two-lane highway crash occurrence formulation and injury-mitigation strategy
development in China
Y. Ci, L. Wu, J. Zhao, Z. Liu & G. Zhang

The consistency of horizontal alignment at tunnel entrance and exit zone
Z. Yang, H.F. Han, Z.Y. Xiong & D.L. Lei

The gradation test prediction model of GAC-20 modified asphalt mixture
Z. Sun, T. Wang, Z. Wu & G. Zhu

Other Topics

A fast simulation tool for the undergraduate course of pavement engineering
X. Chen

Bearing capacity of bored pile in refreezing metaphase and telophase in permafrost region
X. Liu, C. Zhou, D. Feng, Y. Cao, P. Cao & R. Jing

Dynamic evolution trajectory of defects and aggregates and its relation to asphalt mixtures’ cracking propagation behavior
X. Zhu, L. Li, D. Sun, Y. Yuan & H. Wang

Reuse of mining waste into innovative alkali-activated-based materials for road pavement applications
C. Sangiorgi, C. Lantieri, P. Tataranni, J. Castro-Gomes & M. Gabriel

Safety and reliability of a road: A prototypical study based on the directive 2008/96/EC
F.G. Praticò, D. Catalfamo & C. Lanciano

Sound barriers landscape design: Dynamic aesthetics factors and visually compensation method
X. Qin, Q. Tan & H. Han

Strength size effect on small asphalt mixture specimens at low temperature
A. Cannone Falchetto, K.H. Moon & M.P. Wistuba

The effect assessment for urban flooding under different curb inlets with the 2D hydrodynamic model
Y. Geng, X. Chen & Z. Wang